Index Accessories Selection Guide     L100 Light Detector The L100 is designed for use with the Barracuda and Solidose family of meters.  L100 with monitor adapter  L100 with lux adapter Monitor and Lux Adapter The light detector L100 is designed to comply with the needs for quality control in modern X-ray departments. With a monitor and a lux adapter L100 measures the brightness on monitors and film viewing boxes, as well as ambient light in a room. The L100 has the same spectral response as the human eye. That makes it reliable for all different types of measurements, independent of light source. The spectral response complies with the CIE curve.  CIE Curve and L100 spectral response Specifications for L100 with Lux Adapter Ranges with Barracuda   Ambient light 0.01 - 24000 lx     Ranges with Solidose 300/400   Ambient light 0.02 - 100 000 lx Specifications for L100 with Monitor Adapter Ranges with Barracuda   Viewing box 0.03 - 72000A cd/m²   ± 5% Monitor (or CRTB) 0.03 - 4000 cd/m²   ± 0,006 or 5%     Ranges with Solidose 300/400   Viewing box 0.05 - 275 000 cd/m²   ± 5% Monitor 0.05 - 275 000 cd/m²   ± 5% B) When measuring on CRTs, the measuring range depends on the frequency and the after glowing time in the phosphors. The table shows a typical range. All specifications can be changed without prior notice.  L100: Application Photos Product Application Photo L100 light detector Checking I.I. contrast range on monitor L100 light detector Checking monitor output L100 light detector Checking monitor output (picture 2) Index Accessories Selection Guide Products/Accessories Info Request    Copyright © RTI Electronics AB / Webmaster