News
-
Public Holiday and Changed Opening Hours
16 May 12 Between 17–18 May RTI Headquarter is closed.
RTI Inc is open as usual. -
New Software Release – 2012.05A
11 May 12 Piranha and Barracuda Latest Update
Released: May 11, 2012
Ocean: 2012.05.09.82
QABrowser: 4.2B
oRTIgo: 6.5A
CT Dose Profile Analyzer: 4.1A
Firmware: 2012.2A -
One Shot HVL for Mammography
07 May 12 One shot HVL for mammography is now available to all new Piranhas of version 2 or higher.
One shot HVL is possible both if you are using Ocean or QA Browser, with or without compression paddle.
All Piranhas (version 2 or higher), which are in for re-calibration, will get the one shot HVL feature. -
Time for Calibration - Schedule Yours Now
06 May 12 Please take five minutes to schedule your coming calibration with the RTI Service department.
Light Probe
Measures the Brightness on Monitors with the Same Spectral Response as the Human Eye
The Light Probe is designed to comply with the needs for QA in modern X-ray departments. With a monitor and a lux adapter the Light Detector measures the brightness on monitors and film viewing boxes, and the ambient light in the room. The Light Probe has the same spectral response as the human eye. That makes it reliable for all different types of measurements, independent of the light source. The spectral response complies with the CIE curve.
The Barracuda Light Probe
The Barracuda Light Probe has the same spectral response as the human eye. That makes it reliable for all different types of measurements, independent of the light source. The spectral response complies with the CIE curve. To use the Barracuda Light Probe the Barracuda must have an electrometer module. Recommended model is EMM-BiasW.
The Piranha Light Probe
The Light Probe supports the Piranha ADI (Automatic Detector Identification) system. All information regarding the Probe is stored in a memory inside the probe. When connected, the Piranha automatically identifies the probe and makes all necessary adjustments without any need for interaction from the user. The Piranha ADI system also gives full interchangeability of probes between different Piranha systems using the same type of probes.
| Type | L100B | |
| Spectra Response | CIE Photopic | |
| Acceptance angle | ||
| Lux adapter | 180° (Cosine) | |
| Monitor adapter | Ø 7 mm | |
| Connector | Hirose with built-in ADI | |
| Monitor, viewing box | ||
| Range | 0.03-72000 cd/m2 | |
| Inaccuracy | ±5 % or 0.006 cd/m2 | |
| Ambient light | ||
| Range | 0.01-24000 lx | |
| Inaccuracy | ±5 % or 0.002 lx |
| Type | L100B | |
| Spectra Response | CIE Photopic | |
| Acceptance angle | ||
| Lux adapter | 180° (Cosine) | |
| Monitor adapter | Ø 7 mm | |
| Connector | LEMO Triaxial | |
| Monitor, viewing box | ||
| Range | 0.03-72000 cd/m2 | |
| Inaccuracy | ±5 % or 0.006 cd/m2 | |
| Ambient light | ||
| Range | 0.01-24000 lx | |
| Inaccuracy | ±5 % or 0.002 lx |
Article Nr (with Piranha): 9730007-00
Article Nr (with Barracuda): 9730008-00
Barracuda
Piranha
Solidose 300
Solidose 400