Download -> Software -> WinODS Demo Software -> Requirements and setup instructions

The WinODS Software is packed in ZIP format. We recommend Winzip for the unpacking of the file. Click the icon to the left to download Winzip!

WinODS Demo Software
- requirements and setup instructions

Introduction

This is a demo of the WinODS software that enables you to try the organ dose calculation part of the WinODS package. In the demo version only the location and the projection of the radiation field can be varied. For instructions on how to use the program refer to the help file included with the program. The help file also explains the features of the full WinODS package. For information on how to obtain the full WinODS package see the Read Me file included.

System Requirements

To run the program you will need an IBM compatible computer. Furthermore it needs Windows 3.1 or newer, with at least 4 MB RAM and a 1,44 MB disk drive. The installation on your hard drive will require about 6 MB space. The installation is self explanatory. The program is designed to work with a 640 × 480 VGA display, as most portables use this kind of display, but will work with higher resolutions.

Program Installation under Windows 3.1

Try to close all programs except the program manager before running the installation, as your programs may use some libraries (DLLs) that the installations needs to update.

To install the program using Windows 3.1 either,

1. Select the File-Run option in the program manager pull-down menu.
2. Type A:\SETUP and press ENTER.

or

1. Run the file manager and select the drive with the installation disk.
2. Double click on the file SETUP.EXE in the file list.

Then follow the instructions given by the installation program.

Click the program icon to start the program.

Program Installation under Windows 95/98

Try to close all programs before running the installation, as your programs may use some libraries (DLLs) that the installation needs to update.

To install the program using Windows 95/98 either,

1. Press the start button and select the Run option in the menu.
2. Type A:\SETUP and press ENTER.

or

1. Run the Explorer and select the drive with the installation disk.
2. Double click on the file SETUP.EXE in the file list.

Then follow the instructions given by the installation program.

Start the program by clicking the start button and select the WinODS program.