System Requirements
To run the program you will need
an IBM compatible computer, preferably with an Intel 486DX-33 or
faster processor. Furthermore it needs Windows 3.1 or newer, with
at least 4 MB RAM and a 1,44 MB disk drive. The installation on
your hard drive will require about 6 MB space. The
installation is self-explanatory. The program is designed to work
with a 640 × 480 VGA display, as most portables use this kind of
display, but will work with higher resolutions. A mouse will
simplify the program’s operation but you will be able to use
all functions without one. Make sure that the fonts Courier New,
MS Sans Serif, and Small Fonts (come
with Windows) are installed – if not, please install them
first, otherwise some tables and texts may not display correctly.
Due to some problems in Windows it is also recommended that you
use the small fonts settings for your graphic card – if not
some tables and texts may not display correctly.
Program Installation under Windows 3.1
Try to close all programs except
the program manager before running the installation, as your
programs may use some libraries (DLLs) that the installation
needs to update.
To install the program using Windows 3.1 either,
1. Select the File-Run option
in the program manager pull-down menu.
2. Type A:\SETUP and
press ENTER.
or
1. Run the file manager and
select the drive with the installation disk.
2. Double click on the file
SETUP.EXE in the file list.
Then follow the instructions given
by the installation program. First you must select language for
the installation, then input registration information. After that
you can select which directory to install the RFM files into. If
the suggested directory C:\RFM is all right then click OK, if not
select another directory using the browser or enter another
directory name and click OK. The program will then be installed
in that directory. You can also choose to make backup copies of
files that are replaced during the installation, and finally you
will be able to choose a name for the RFM program group. If there
are any problems with programs in use during the installation,
you can click Ignore or equivalent to get around.
You will also have the possibility to view a file with last
minute changes to the program that not are covered in this
manual.
Done!
Click the program icon to start the program.
Program Installation under Windows 95/98
Try to close all programs before
running the installation, as your programs may use some libraries
(DLLs) that the installation needs to update.
To install the program using Windows 95/98 either,
1. Press the start button and
select the Run option in the menu.
2. Type A:\SETUP and
press ENTER.
or
1. Run the Explorer and
select the drive with the installation disk.
2. Double click on the file
SETUP.EXE in the file list.
Then follow the instructions given
by the installation program. First select language for the
installation, then input registration information. After that you
can select which directory to install the RFM files into. If the
suggested directory C:\PROGRAM FILES\RFM, or equivalent, is all
right then click OK. Under Windows 95, programs are normally
installed in the directory C:\PROGRAM FILES or likely, depending
on your language version. If you want to change this, select
another directory using the browser or enter another directory
name and click OK. The program will then be installed in that
directory. You can also choose to make backup copies of files
that are replaced during the installation, and finally you will
be able to choose a name for the RFM program group. If there are
any problems with programs in use during the installation, you
can click Ignore or equivalent to get around. You
will also have the possibility to view a file with last minute
changes to the program that are not covered in this manual.
Done!
Start the program by clicking the
start button and select the RFM program.
|
|
RFM Demo Software
